| |
 |
| FLOW REGULATORS:
STAINLESS STEEL AND CARBON K50
|
 |
|
1st LEVEL (Type 910) in STAINLESS STEEL
1st LEVEL of the next generation flow regulators with a membrane protected piston and a chemically treated STAINLESS STEEL body.
Weighing only 375 grams, it is a top of the range balanced servo-assisted flow regulator.
The main components are in STAINLESS STEEL. Our technicians chose not to use chromed brass for this product as they were aware that a diver with a minimum of experience, given the choice between a chromed brass or stainless steel regulator, would not hesitate to chose the latter.
The characteristics of stainless steel are well known. After titanium it is the most widely used and valued metal in medicine and catering, as well as in marine environments.
|
2nd LEVEL in CARBON and OCTOPUS
 Main features:
-
BALANCED and servo-assisted with pneumatic movement, (balanced and servo-assisted OCTOPUS with piston)
-
Venturi effect controlled by a deflector, DIVE+/PREDIVE- adjustment device
-
Silicon inhale membrane with stainless steel disk
-
Large silicon exhale membrane, may be inspected from the outside
-
Discharge whiskers incorporated
-
Silicone mouthpiece, rubber self-supply button
-
Operating pressure from 9.5 bar to 12 bar.
Materials and specifications:
-
Body, mechanism and internal parts in CARBON (patented)
-
OCTOPUS: body, mechanism and internal parts in Nylon reinforced glass
-
Stainless steel lever and discharge membrane disk
-
Recommended intermediate pressure 10.5 bar (CE EN250)
-
"Royal" oxygen pipe with large internal diameter, length 800 mm. - OCTOPUS pipe: length 900 mm, yellow ("royal" oxygen on request)
-
The good heat conduction properties of Carbon enable the valve to be used in very cold water (patented)
K50 A MUST.
|
|
|
